Kunshan Keyiyou Hardware Machinery Co., Ltd.
Contact person: Mr. Yin
Seating machine: +86 512-57270580
Address: No. 55, Changshun Road, Zhangpu Town, Kunshan City
The center console die ejector has a ejector pin for a die, a plastic die, a ejector pin for a die-casting die, and a ejector pin for a rubber die, all of which have the same effect. They are all designed for discharge and ejection. . The ejector pin on the injection mold and the die casting mold is generally a part of the molded product. The clearance between the ejector pin and the template hole is small, and leakage of material can be prevented. The end face of the mandrel must also be the same as the surface roughness of the product and become part of the product structure. The material used to make the ejector pin of a die casting mold also requires high temperature resistance. The ejector pin of cold punching die generally only functions as a simple demoulding and discharging. It does not matter if the clearance between the jack and the hole is large.