Car die inclined top bar

Product Categories

contact us

Kunshan Keyiyou Hardware Machinery Co., Ltd.

Contact person: Mr. Yin

Phone: 15950192580

Seating machine: +86 512-57270580

Fax: 0512-57274077


Address: No. 55, Changshun Road, Zhangpu Town, Kunshan City

Inclined roof

Your current location: Home >> Products >> Inclined roof

Inclined roof

  • Detailed introduction

1. Three principles of cooling water circuit: A. Rapid cooling, B. Uniform mold temperature, and C. Convenient processing.

2. The angle from the center of the mold should be rounded.

3. For the two half-molds, the parting stroke between the upper fixed plate and the master plate must be controlled by the mechanism. The LP must have an injection bushing on the male plate, and an LK shutter is generally required.

4 The method of handling the inner barb can be generally used for slanting, inner slider, stripping plate (top ejecting plate), and the top ejector should be avoided under the slider to avoid collision or interference.

URL of this article:

Key words:Cardieinclinedtopbar,Automobilemoldinclinedtopbarmanufacturers,Cardieinclinedtopbarcompany